For Sale: E Regulator
- Ceann Cromtha
- Posts: 883
- Joined: Mon Aug 01, 2005 5:03 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
- Location: Baltimore, Maryland USA
For Sale: E Regulator
For sale: E regulator made by Nick Whitmer, solid as a rock with three reeds. Made for D/concert pitch set. I'm selling it to fund another project. Pictures, sound samples available on request. Please send me a private message if interested.
- rorybbellows
- Posts: 3195
- Joined: Sun Dec 14, 2003 7:50 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: the cutting edge
Re: For Sale: E Regulator
Where does an E reg fit . Is it straight onto the main stock
I'm Spartacus .
- Ceann Cromtha
- Posts: 883
- Joined: Mon Aug 01, 2005 5:03 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
- Location: Baltimore, Maryland USA
Re: For Sale: E Regulator
Yes, where the tenor regulator goes. Or, it can be mounted inboard or outboard with a connected tube.
- pancelticpiper
- Posts: 5320
- Joined: Mon Jul 10, 2006 7:25 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Playing Scottish and Irish music in California for 45 years.
These days many discussions are migrating to Facebook but I prefer the online chat forum format. - Location: WV to the OC
Re: For Sale: E Regulator
I played my set like that for many years, with a E reg in place of the small reg in the mainstock.
It fills in the missing note of the scale playable on the lower two regs
G A B C D (E) F# G A
It fills in the missing note of the scale playable on the lower two regs
G A B C D (E) F# G A
Richard Cook
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
- PJ
- Posts: 5889
- Joined: Tue Jan 18, 2005 12:23 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: ......................................................................................................
- Location: Baychimo
Re: For Sale: E Regulator
Also in D scales:
D, E, F#, G and A
Some nice chords G/E, A/Eand B/E.
I have an E reg mounted inboard on my Whitmer D set. Îll try find a photo.
D, E, F#, G and A
Some nice chords G/E, A/Eand B/E.
I have an E reg mounted inboard on my Whitmer D set. Îll try find a photo.
PJ
- rorybbellows
- Posts: 3195
- Joined: Sun Dec 14, 2003 7:50 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: the cutting edge
Re: For Sale: E Regulator
You could also try ,ert gde xyz and kpq especially in the Dorian mode transcribed over the Arian mode with a bit of improvisation, the sky's the limit unless you're an astronaut because then there's no limit.
RORY
RORY
I'm Spartacus .
-
- Posts: 5
- Joined: Fri Jun 09, 2023 11:46 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have recently started on the uilleann pipes, and have found this forum to be chock full of good info. I have a set of Carbony pipes.
Re: For Sale: E Regulator
I am interested in your E regulator. I tried posting privately but could not, probably because I am a new member of the forum.
I am also new to the pipes, having started just thus last April. I have a half set of the Carbony pipes. Nice that they are made nearby in Corvallis OR USA. I was able to pick them up from the maker, Rob Gandara, and hear him play them for a bit.
As a newbie I realize it is way too soon to start with the regulators. However, being mechanically inclined, and owning a 3d printer, I have thoughts of making a custom stock for just one regulator, allowing me to try one out without taking the plunge on a full set. Carbony is not yet offering regulators in any case.
Try posting a private reply to me?
I am also new to the pipes, having started just thus last April. I have a half set of the Carbony pipes. Nice that they are made nearby in Corvallis OR USA. I was able to pick them up from the maker, Rob Gandara, and hear him play them for a bit.
As a newbie I realize it is way too soon to start with the regulators. However, being mechanically inclined, and owning a 3d printer, I have thoughts of making a custom stock for just one regulator, allowing me to try one out without taking the plunge on a full set. Carbony is not yet offering regulators in any case.
Try posting a private reply to me?
- Nanohedron
- Moderatorer
- Posts: 38238
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: For Sale: E Regulator
Two more approved post submissions and you'll be accorded full privileges, which include sending and receiving PMs. Until then, email must do.
The other privileges are access to the Used Instruments Exchange (UIE), and the ability to edit, within time constraints, your own posts without prior approval.
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
-
- Posts: 5
- Joined: Fri Jun 09, 2023 11:46 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have recently started on the uilleann pipes, and have found this forum to be chock full of good info. I have a set of Carbony pipes.
Re: For Sale: E Regulator
Ok. Thanks for letting me know the limitations.
-
- Posts: 5
- Joined: Fri Jun 09, 2023 11:46 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have recently started on the uilleann pipes, and have found this forum to be chock full of good info. I have a set of Carbony pipes.
Re: For Sale: E Regulator
Needing to post some to become a fully qualified member. Anyone else using a 3d printer to make accessories for their pipes? I printed a cap for the main stock to allow me to play with just the chanter. I sometimes fit the drones to start getting used to them, but find not having to deal with them makes practicing easier. I also have a half baked idea for making a sliding key to allow F natural to be played. Working on a prototype, not too sure my design is reasonable.
- Ceann Cromtha
- Posts: 883
- Joined: Mon Aug 01, 2005 5:03 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
- Location: Baltimore, Maryland USA
Re: For Sale: E Regulator
I’ll toss the other regulator (baritone, with D, G and A keys) in the deal. Like I said, I’m financing a future project/purchase.
-
- Posts: 5
- Joined: Fri Jun 09, 2023 11:46 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have recently started on the uilleann pipes, and have found this forum to be chock full of good info. I have a set of Carbony pipes.
Re: For Sale: E Regulator
Still for sale?
- Ceann Cromtha
- Posts: 883
- Joined: Mon Aug 01, 2005 5:03 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
- Location: Baltimore, Maryland USA
- Ceann Cromtha
- Posts: 883
- Joined: Mon Aug 01, 2005 5:03 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
- Location: Baltimore, Maryland USA
Re: For Sale: E Regulator
Sale pending.