Adding the Clarke Sweetone (at bottom)....
----------------------------------------------
NOTES:
Entries take the general form: Brand and Model Name (Materials employed), "tunable" or "fixed", (Bore diameter x Bell-to-blade length) [Window Length]
Because of the significant differences between them, Cylindrical Whistles, Untunable Tapered Whistles, and Tunable Tapered Whistles are listed separately.
Metric
and Imperial measurements might be included, eg: Generation (Poly head, brass or nickel body) (0.46", 11.9mm x 10.48", 266mm)
References to Bracker can be traced to discussions at:
viewtopic.php?f=1&t=84789
Whistles are listed in order of bore size. In order to help identify clusters and gaps, a single dash identifies any unpopulated 0.1mm (~0.004") increment.
Also included in the list are the standard sizes of K&S thin walled tubing, eg: 7/16" bore tubing (11.1mm)
Please feel free to advise any additional information about these or other instruments.
----------------------------------------------
CYLINDRICAL WHISTLES
Susato Kildare, Very Small Bore (ABS) High D, tunable (0.40", 10mm)
-
-
-
-
-
-
-
-
Reyburn [narrow bore?] D (10.9mm)
-
7/16" bore tubing (11.1mm)
Clare 2 piece (11.2mm)
-
-
[Bracker very narrow] Susato Kildare (11.5mm)
Jos. Morneault High D in Rosewood, tunable (0.45", 11.5mm)
-
Killarney (Brass head & tube, poly stopper and cover), tunable, (11.7 x 270mm) [4mm]
Susato Kildare Small Bore (ABS) High D, tunable (0.46", 11.8mm)
15/32" bore tubing (11.9mm)
Generation (Poly head, brass or nickel body) (0.46", 11.9mm x 10.48", 266mm) [5.1mm]
The Dannan Causeway (Poly head, brass body) (0.46", 11.9mm)
Feadog Mk 1 (Poly head, brass body) (12.0mm) [5.2mm]
Bracker narrow D aluminium: 13.9mm OD, 12mm ID, 7x4mm window
Burke Brass, Narrow Bore High D, tunable (0.47", 12mm)
Jerry Freeman Blackbird, (12.0 mm) [4.15 mm]
Tony Dixon (not sure what model), (12.0 mm)
-
Milligan (12.2mm)
Goldie (12.3mm)
Kerry Songbird (12.3mm)
MacManus (12.3mm)
OZ Delrin Vizor (12.3mm)
Reyburn high D (12.3 mm)
-
Reyburn Session D brass: 14.5mm OD, 12.5mm ID, 8x4mm window
Silkstone D+, aluminium (12.6mm, 1/2" internal, 15.6mm external)
1/2" bore tubing (12.7mm)
O'Brien 3-pice High D in Granadillo, tunable (0.5", 12.7mm)
McManus High D in Blackwood, tunable (0.50", 12.7mm)
Bracker standard D aluminium: 14.8mm OD, 12.8mm ID, 8x4mm window
Dixon Cupro-nickel (Delrin head) (12.8 mm bore) [4.5 mm]
Alex Dewilde, Brass head with plastic fipple High D, tunable (0.50", 12.8 mm)
Löfgren D aluminium: 15.8mm OD, 12.8mm ID, 7.9x4.5mm window
Overton D aluminium: 15.7mm OD, 12.8mm ID, 8.8x5.3mm window
Setanta, Brass head and fipple High D, tunable (0.50", 12.8mm)
-
[Bracker mid range] (13.0mm)
-
-
Kerry Cobre (13.3mm)
-
17/32" bore tubing (13.5mm)
Burke Session D brass: 14.2mm OD, 13.5mm ID, 8x4.5mm window
Walton's Mellow D (13.5mm) [5.5mm?]
Jerry Freeman Mellow Dog, (13.56 mm) {uses a newer Feadog head?} [4.2 mm]
-
-
-
Tilbury Aluminum D (14.0mm)
-
-
9/16" bore tubing (14.3mm)
Burke Wide Bore (14.3mm)
-
[Bracker very wide] 14.5
-
-
-
-
19/32" bore tubing (15mm)
-
Kerry Custom/MacManus (15.2mm)
-
-
-
-
-
-
5/8" bore tubing (15.9mm)
Kerry Busker Aluminum D (16.0 mm)
-----------------------------------
TAPERED WHISTLES, UNTUNABLE
Clarke D, tinplate, at sounding blade: 15.3 mm; 51.5 mm down (bottom of logo): 14.9 mm; 88 mm down (between the gold lines): 13.8 mm; 265 mm down (foot): 9.2 mm [4.6 mm]
-----------------------------------
TAPERED WHISTLES, TUNABLE
P.G. Bleazey High D in Mopane, tunable (0.37", 9.3mm at foot; 0.50", 12.8mm at middle joint)
Clarke Sweetone D, rolled tinplate with poly head, 15.7mm where tube enters head, 9.2mm at foot. Blade to bell 259mm. Window 7.8 by 4.75mm