A question about flutemakers
-
- Posts: 35
- Joined: Thu Nov 17, 2005 12:34 pm
- Please enter the next number in sequence: 1
- Location: Baltimore, MD
A question about flutemakers
What's the difference between Terry McGee's flutes and Patrick Olwell's flutes?
- ChrisLaughlin
- Posts: 2054
- Joined: Fri Jun 29, 2001 6:00 pm
- antispam: No
"Terry McGee" and "Patrick Olwell" are actually just brand names. The flutes themselves are identical - mass-manufactured in Chinese government-run prison-factories using wood from endangered sacred trees cut down in Tibet by followers of the Dalai Lama under threat of execution by the Chinese military apparatus. Once the flutes have been manufactured by the political disidents working as slaves in the prison-factories the Chinese government sells them to Happy Fun Industries, a front for Al Qaeda which is, coincidentally, also a subsidiary of Kellog, Brown & Root. Happy Fun Industries then rebrands them as "Terry McGee"TM and "Patrick Olwell"TM flutes and sells them to unsuspecting Irish-music addicts all over the world. Other than the name they are identical.
True story.
True story.
- Screeeech!!!
- Posts: 415
- Joined: Sun Sep 11, 2005 2:15 am
- Please enter the next number in sequence: 1
- Location: Out on the patio, sunbathing... ...i wish!
- David Levine
- Posts: 673
- Joined: Thu Apr 03, 2003 12:55 pm
- Please enter the next number in sequence: 1
- Location: Kilshanny, Co. Clare, ROI
- johnkerr
- Posts: 1001
- Joined: Wed Apr 17, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Falls Church VA USA
Chris, you forgot to mention the mascots that Happy Fun Industries has put in place, a la Ronald McDonald and the Keebler Elves. They're in rather limited circulation, but I do happen to have met them both. The Terry McGee mascot is used mainly in the Aussie market, but has established a bit of presence on the Internet. Happy Fun did take him on a world tour though a couple of years ago, and they did a tie-in spot one night in our session at Nanny O'Brien's in Washington DC. I don't think that one resulted in any flute sales for them, however, so perhaps that's why they haven't repeated the event.ChrisLaughlin wrote: Happy Fun Industries then rebrands them as "Terry McGee"TM and "Patrick Olwell"TM flutes and sells them to unsuspecting Irish-music addicts all over the world. Other than the name they are identical.
True story.
The Patrick Olwell mascot is used a lot more sparingly, perhaps as a way to build up the cachet of the brand. Sure, they're all just sticks of wood with holes in them, but careful marketing of the Olwell brand has made it the Cadillac of the flute world. Happy Fun has set up a small Olwell World theme park in rural Virginia, complete with a faux primitive "shop" with no running water and few other modern amenities, where the Patrick Olwell mascot spends most of his time. It's open to tourists, but unfortunately unlike the Guinness Hop Store and other such attractions there are no free samples available at the end of the tour. There's also the Executive Embouchure Enclave nearby, with amenities to rival the grotto at Hugh Hefner's Playboy Mansion. There's a long waiting list to get into that one, though. I haven't made it in there myself yet, but I think Rob Greenway has. Maybe he could reveal a few juicy bits for the rest of us...
- flutefry
- Posts: 480
- Joined: Fri Aug 05, 2005 9:58 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Pipes have become my main instrument, but I still play the flute. I have emerged from the "instrument acquisition" phase, and am now down to one full set of pipes (Gordon Galloway), and one flute (Hudson Siccama).
- Location: Coastal British Columbia
- Jumbuk
- Posts: 311
- Joined: Thu Aug 18, 2005 10:58 pm
- Please enter the next number in sequence: 1
- Location: Melbourne, Australia
Re: A question about flutemakers
Poor JPcares! You ask a question (that seems to make sense to you) and everyone runs off into slapstick hour!JPcares wrote:What's the difference between Terry McGee's flutes and Patrick Olwell's flutes?
I think one reason for the surreal responses is just this: the difference is that Terry McGee flutes are made by Terry McGee and Patrick Olwell flutes are made by Patrick Olwell.
Do a search on this forum - there have been some good comments about both types of flutes owned by people on the list. See the recent thread that compares Jon C, M&E and McGee. That will be enough to show you that many of the differences are subjective.
Also, check out Terry's website - plenty of explanation of his approach and philosophy.
- Wormdiet
- Posts: 2575
- Joined: Mon Jan 31, 2005 10:17 pm
- Please enter the next number in sequence: 1
- Location: GreenSliabhs
Re: A question about flutemakers
THat and flutes by either maker can vary dramatically from one instance to the next.Jumbuk wrote:Poor JPcares! You ask a question (that seems to make sense to you) and everyone runs off into slapstick hour!JPcares wrote:What's the difference between Terry McGee's flutes and Patrick Olwell's flutes?
I think one reason for the surreal responses is just this: the difference is that Terry McGee flutes are made by Terry McGee and Patrick Olwell flutes are made by Patrick Olwell.
Do a search on this forum - there have been some good comments about both types of flutes owned by people on the list. See the recent thread that compares Jon C, M&E and McGee. That will be enough to show you that many of the differences are subjective.
Also, check out Terry's website - plenty of explanation of his approach and philosophy.
OOOXXO
Doing it backwards since 2005.
Doing it backwards since 2005.
- Wormdiet
- Posts: 2575
- Joined: Mon Jan 31, 2005 10:17 pm
- Please enter the next number in sequence: 1
- Location: GreenSliabhs
I didn't to imply that the variance would be in terms of quality (After all, I'm committed to one maker's flute already and the other is the frontrunner for my next D flute!) but in terms of style. Rudall/Pratten, embouchures, and all that.jim stone wrote:I don't know T McGee's flutes well at all, sadly,
but I have the strong impression that Olwells
are consistent in quality and sound (setting
aside different models, of course).
OOOXXO
Doing it backwards since 2005.
Doing it backwards since 2005.
-
- Posts: 35
- Joined: Thu Nov 17, 2005 12:34 pm
- Please enter the next number in sequence: 1
- Location: Baltimore, MD
Funny...
It's a funny thing. I started getting some really helpful info in my inbox. I appreciate this very much but I could not figure what triggered this off. So I looked in this thread and I could not for the life of me remember posting this question. I worried that perhaps my short term memory was going south for the winter. Later I found that my son, while I was still still logged on, posted this question. No harm done though because the information shared was indeed very helpful. Thanks... And we did find the above post very amusing.