Just started playing tin whistle
Just started playing tin whistle
Recently i bought a waltons D whistle, along with a book and CD to help me learn it. Lessons are starting new me in the new year, so untill then i have been using the book. I can play a few tunes in the book. But tunes such as the wild rover, which seems like a good beginners tune i struggle with. i know that you blow when you are repeating a note, but when you go down or up, do you hold your breath or blow again for each individual note. I just cant change fingers and reblow fast enough. Im nothing if none of this is making sense, but if it does, and you think you can help me, please reply.
Thanks
Thanks
Re: Just started playing tin whistle
Welcome.Woodsy wrote:Recently i bought a waltons D whistle, along with a book and CD to help me learn it. Lessons are starting new me in the new year, so untill then i have been using the book. I can play a few tunes in the book. But tunes such as the wild rover, which seems like a good beginners tune i struggle with. i know that you blow when you are repeating a note, but when you go down or up, do you hold your breath or blow again for each individual note. I just cant change fingers and reblow fast enough. Im nothing if none of this is making sense, but if it does, and you think you can help me, please reply.
Thanks
There are various ways to blow a flute/whistle.
In dance music (but not limited to this) you dont pause the breath between notes but rather have a steady flow. Unless you pause because you need air.
When you want to accentuate a note (after breathing or when beginning a melody), you often use the tongue, just press it like your saying the letter "T".
Ornamentation is used when a note is repeated. Can be done in several ways, but I myself just lift the finger and press it down again fast.
Last edited by Rhadge on Thu Nov 13, 2008 10:08 am, edited 2 times in total.
-
- Posts: 92
- Joined: Mon Oct 20, 2008 5:57 am
- Please enter the next number in sequence: 1
- Location: Phillipsburg, NJ
- Contact:
Welcome to the world of tin whistles!!
Matter of fact I am fairly new to the whistle as well....playing about 3 months now and I bought the same whistle as you did.
I had prior experience in playing a wind instrument so I already knew about that but what I did learn on the tin whistle is that most of the time you don't tongue the notes....meaning that you stop and start the windflow with your tongue between notes. You want to keep a steady stream of air going while moving your fingers to get to different notes. The way to separate the same notes is by using a cut. As the notes get higher you have to change the positioning of your mouth (embouchure) and increase the air speed to get the higher notes.
I started the basics of the whistle from a book too. But what really made the difference is that I started taken lessons from a seasoned player of the whistle.
Again welcome aboard and don't be shy to ask questions here. The group of people here are great and they are very helpful.
By the way, where are you located? Depending where you are, there might be some whistle sessions that you can go to.
Rob
Matter of fact I am fairly new to the whistle as well....playing about 3 months now and I bought the same whistle as you did.
I had prior experience in playing a wind instrument so I already knew about that but what I did learn on the tin whistle is that most of the time you don't tongue the notes....meaning that you stop and start the windflow with your tongue between notes. You want to keep a steady stream of air going while moving your fingers to get to different notes. The way to separate the same notes is by using a cut. As the notes get higher you have to change the positioning of your mouth (embouchure) and increase the air speed to get the higher notes.
I started the basics of the whistle from a book too. But what really made the difference is that I started taken lessons from a seasoned player of the whistle.
Again welcome aboard and don't be shy to ask questions here. The group of people here are great and they are very helpful.
By the way, where are you located? Depending where you are, there might be some whistle sessions that you can go to.
Rob
Re: Just started playing tin whistle
Hi Woodsy, welcome to Chiff & Fipple, and the exciting world of whistles. You have come to the right place.Woodsy wrote: think you can help me, please reply.
Thanks
''Whistles of Wood'', cpvc and brass. viewtopic.php?f=1&t=69086
-
- Posts: 18
- Joined: Tue Oct 28, 2008 10:29 pm
- Please enter the next number in sequence: 1
- Location: Covington, WA
Welcome from another newbie!
Others have addressed your question better than I can (great stuff on breathing, btw), but as a person who has played guitar for over thirty years, I can add to this that you should not rush yourself. Commit the tunes to muscle memory and increase your speed only when you can play the song without errors at a slow pace.
I can't tell you how many days, months, maybe years of progress retardation I committed by rushing my guitar playing. I committed many, many errors to memory and had a very difficult time overcoming them. Don't make that mistake. Be patient and it will come.
Welcome aboard! I've only been playing the whistle for a couple of weeks now and I've already started hoarding them. It will happen to you!
I can't tell you how many days, months, maybe years of progress retardation I committed by rushing my guitar playing. I committed many, many errors to memory and had a very difficult time overcoming them. Don't make that mistake. Be patient and it will come.
Welcome aboard! I've only been playing the whistle for a couple of weeks now and I've already started hoarding them. It will happen to you!
- riverman
- Posts: 692
- Joined: Sun Nov 06, 2005 4:05 pm
- Please enter the next number in sequence: 1
- Location: Eel River, Indiana
Hi Woodsy, you are starting on a very pleasant journey!
I also started with the Walton's starter kit--who can lose with something this simple? And the whistle has a fast learning curve.
Later, when you're ready, you might want to get Grey Larsen's "The Tin Whistle Toolbox" which also comes with a CD. That book helped me immensely.
Also, when you are ready, try a few other whistles.
And don't be insulted when the cat comes up into your lap and yowls for you to stop--like mine did! (To the intense amusement of my family!)
I also started with the Walton's starter kit--who can lose with something this simple? And the whistle has a fast learning curve.
Later, when you're ready, you might want to get Grey Larsen's "The Tin Whistle Toolbox" which also comes with a CD. That book helped me immensely.
Also, when you are ready, try a few other whistles.
And don't be insulted when the cat comes up into your lap and yowls for you to stop--like mine did! (To the intense amusement of my family!)
"Whoever comes to me I will never drive away." --Jesus Christ.
- Mick Down Under
- Posts: 288
- Joined: Tue Jul 22, 2008 3:59 am
- Please enter the next number in sequence: 1
- Location: Redcliffe, QLD
To cut, simply lift the finger on the bottom most hole of the note you are playing and put it back down. It needs to be done quickly, but the practice should be done slowly with a gradual buildup in speed as you get the co-ordination. To cut on the B note (top most hole) it is the same procedure, simply lift and drop the finger.
Mick
Mick
Such is life...
Ned Kelly just before the b#sta*rds hung him!
Ned Kelly just before the b#sta*rds hung him!
- MTGuru
- Posts: 18663
- Joined: Sat Sep 30, 2006 12:45 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: San Diego, CA
Actually, that's not the standard or normal way to perform a cut, although it is one way. The T1/T3 finger technique, or the "next finger" technique are more usual. Check Brother Steve's site or another tutorial resource for the details.Mick Down Under wrote:To cut, simply lift the finger on the bottom most hole of the note you are playing and put it back down. It needs to be done quickly, but the practice should be done slowly with a gradual buildup in speed as you get the co-ordination. To cut on the B note (top most hole) it is the same procedure, simply lift and drop the finger.
http://www.rogermillington.com/siamsa/b ... /cuts.html
Ascending cuts, descending cuts, and same-note cuts may all involve slightly different techniques.
Vivat diabolus in musica! MTGuru's (old) GG Clips / Blackbird Clips
Joel Barish: Is there any risk of brain damage?
Dr. Mierzwiak: Well, technically speaking, the procedure is brain damage.
Joel Barish: Is there any risk of brain damage?
Dr. Mierzwiak: Well, technically speaking, the procedure is brain damage.
-
- Posts: 576
- Joined: Thu Apr 21, 2005 10:58 am
- Please enter the next number in sequence: 1
- Location: Columbus, OH
- Contact:
The whole site is better than most books I've seen. If you're new to the whistle, start here:MTGuru wrote:Check Brother Steve's site or another tutorial resource for the details.
http://www.rogermillington.com/siamsa/b ... /cuts.html
http://www.rogermillington.com/siamsa/b ... index.html
-Craig
Re: Just started playing tin whistle
Ornamentation (such as a cut or a tap) can be used to separate two notes (same or not) but be careful that you don't inadvertently introduce an accent in the wrong place, else it will diminish the pulse or phrasing of the tune. For example, the first bar of The Connaughtman's RamblesRhadge wrote:Ornamentation is used when a note is repeated.
|:FAA dAA|
could be played with cuts separating the two 'A' notes,
|:FA{c}A dA{c}A|
provided that you do not affect the timing of the triplets FAA and dAA, whether they are played straight or swung. Nor do you want to cause the third note in the triplet to be accented, unless that's your intention (actually it's a neat effect, but that's another story).
Occasionally you'll hear players who seem to deftly execute ornaments but for some reason the rhythm seems convoluted. Now you know (part of) the reason why.
- Mick Down Under
- Posts: 288
- Joined: Tue Jul 22, 2008 3:59 am
- Please enter the next number in sequence: 1
- Location: Redcliffe, QLD
Re:
MTGuru wrote:Actually, that's not the standard or normal way to perform a cut, although it is one way. The T1/T3 finger technique, or the "next finger" technique are more usual. Check Brother Steve's site or another tutorial resource for the details.Mick Down Under wrote:To cut, simply lift the finger on the bottom most hole of the note you are playing and put it back down. It needs to be done quickly, but the practice should be done slowly with a gradual buildup in speed as you get the co-ordination. To cut on the B note (top most hole) it is the same procedure, simply lift and drop the finger.
http://www.rogermillington.com/siamsa/b ... /cuts.html
Ascending cuts, descending cuts, and same-note cuts may all involve slightly different techniques.
Yes, I should have said it was one way of doing it. I tend to forget the more usual way as I like the sound of Grey Larsons method from his book 'Tin Whistle Toolbox'. Apologies for any misunderstanding I may have caused.
Mick
Such is life...
Ned Kelly just before the b#sta*rds hung him!
Ned Kelly just before the b#sta*rds hung him!